Material forming

Parameters are given for material quality S 235JR+N

Press brake CTO 250A

max. sheet length 4000 mm
max. sheet thickness 20 mm
Nominal pressing force 2500 kN
Table length 4000 mm
Passage between stands 3420 mm
Bending of mat. HARDOX 400,500 tlmax=8mm, Lmax=2000mm
Radius knives R5 /R12 / R20 / R25

Sheet metal roll bending machine XE2000/6

max. sheet width 2000 mm
max. sheet thickness 6 mm
Min. inner diameter 195 mm
max. Outer diameter unlimited
Diameter of the upper cylinder 150 mm
Diameter of the side cylinders 170 mm

Sheet metal roll bending machine XZMP 2000/8C

max. sheet width 2000 mm
max. sheet thickness 12 mm
Min. inner diameter 360 mm
max. inner diameter unlimited
Diameter of cylinders 300 mm

Hydraulic sheet metal roll bending machine 4. cylindrical AHS30/25

max. sheet width 3100 mm
max. thickness of fold. plate sheet 40mm /in width 620mm / on diameter 1290mm
max. thickness of rolled plate sheet 48mm/in width 620mm /on diameter 1290mm
Min. inner diameter 510mm/ depending on the thickness of mat.
max. inner diameter unlimited
Diameter of cylinders upper 430mm/ lower 390mm/ lateral 330mm
Sheet metal roll bending machine is possible to use for rolling of cones, min. Ø 645mm.

Profile roll bending machine Herkules

PROFILE (CROSS-SECTION)
L profile up to max. size 50 / 50
U profile up to max. size 100
Flat steel up to max. size 12 x 70
Round steel up to max. diameter 25
Pipe up to max. diameter 103
Hollow section up to max. size 40 / 60
inner diameter min 900mm
Outer diameter unlimited
diameters (inner) smaller than 900 – consultation required (influence of material diameter and profile)

Straightening press 80t

max. thickness of straightened material 50 mm
Straightening table 360x1600mm

The production possibilities of material forming are governed by the power table of the machine in relation to the material quality, thickness and width of the material.

DO YOU NEED HELP?

DO NOT HESITATE TO CONTACT US

QUICK CONTACT